In 2014, we were approached by Currie Enterprises. They were looking for a heavy duty pitman arm for their offroad race rig #88. We engineered and manufactured a heavy duty custom pitman arm for their vehicle. Using our Omax water jet, we cut the pitman arm out of 1 inch thick billet 4140 chromoly, and then heat treated for maximum strength.
Brandon Currie went on to win the King of the Hammers EveryManChallenge in 2015.
In 2016, #88 was entered into King of the Hammers EveryManChallenge again - this time, with Jessi Combs at the wheel. Ms. Combs took first place.
Congratulations to Brandon Currie, Jessi Combs, Currie Enterprises and Savvy Offroad for the hard work and dedication!
One of the key advantages of our patented FAB SERIES® steering system is the custom fabrication options. If you have a heavily modified vehicle, using off the shelf steering components can get tricky. In the case of the "John Deere Bronco", we were able to put together a steering system using our 1 inch forgings, fabricating sleeves, and reaming the knuckle's tapered holes up to fit the 0.675" cartridge.
See what you can do with FAB SERIES® steering systems.
