We can build any steering or suspension part you need

Rare Parts can custom manufacture just about any chassis or car part you need, whether it’s for hot rods, for muscle cars, concourse cars or other cars. Challenge us – and see what we can do. Buy or build now

OMAX 5555

This water jet precision machine is perfect for complex, customized designs.
View Machines

OKUMA LB3000EXMY HORIZONTAL CNC LATHE

This lathe can do everything our LB15 can do - and then some. Equipped with live tools and a Y axis, this machine is perfect for more complicated parts. Parts can be completed in one single operation where it may have taken 2 or 3 machines in the past to complete. This results in lower part cost and faster cycle times. One example is the cotter pin hole in this ball stud. Prior to this machine these were all drilled and chamfered by hand in a drill press. Another example is this aluminum retaining nut for a Jeep JK upper ball joint. It is completely bored, internally threaded, and hex flats are milled in this one machine.
View Machines

BRIDGEPORT CONQUEST V-1000 CNC VERTICAL MILL

With a massive 24x48 table we can fixture multiple jobs at one time with minimal tear down and set up. Also with an X axis travel of 40",Y axis of 24" and a Z axis of 24" we can machine large and long parts. It has a 30 station tool turret for just about any tool we may need to run a part. We machine everything from Tie Rod Ends to control arm shafts using this machine. All parts are fixtured for minimum set up and maximum efficiency.
View Machines
Custom_omaxx.jpg
OMAX 5555
OKUMA LB3000EXMY HORIZONTAL CNC LATHE
BRIDGEPORT CONQUEST V-1000 CNC VERTICAL MILL